Swipe & click to view
  • TopJet
  • Mud-Shear Sub
  • Drift Catcher
  • Pressure Test Sub (PTS) MX
  • HyPR HoleSaver
  • DAV MX CircSub
  • Floats
    • TopJet

      TopJet

      The TopJet™ is an increasingly popular solution, used on a number of rigs to speed up Run in Hole (RIH) with closed-end assemblies. The top filling coupling is quick to install, injects fluid more quickly and simultaneously allows air and spray to vent downwards. Commonly used when the string is being run in hole with full floats/NRVs, the device rests and seals between the drill-pipe and top-drive to reduce filling time delays and overspill.

      Find out more
    • Mud-Shear Sub

      Mud-Shear Sub

      The Mud-Shear Sub enables substantial savings on mud conditioning prior to commencing milling operations. With the milling assembly run in up to the penultimate stand, the Mud-Shear Sub is installed just below rotary table. By pumping through the sub, rapid shearing can be achieved, this is often done in conjunction with an open CircSub above the mill.

      Find out more
    • Drift Catcher

      Drift Catcher

      The Drift Catcher is a downhole pipe drift verification tool which eliminates the need for risky and time-consuming drifting in the derrick or ad-hoc in-hole wire tail drifting methods. Simply pump the drift and see the pressure rise confirm the pipe has been drifted within a few minutes. Low cost, reliable, simple, fast and highly visible drifting assurance.

      Find out more
    • Pressure Test Sub (PTS) MX

      Pressure Test Sub (PTS) MX

      The Pressure Test Sub is a simple yet accurate way to perform multiple pressure tests on the string with the capability to regain full circulation after each test. Pressure thresholds are easy to configure on the rig and the MX™ shearing mechanism delivers very precise shearing points.

      Find out more
    • HyPR HoleSaver

      HyPR HoleSaver

      The HyPR™ HoleSaver™ is the world's first hydraulic pipe recovery system. A highly powerful HyPR™ jetting dart cuts through full strength subs in just a couple of hours, giving the user a truly low cost and rapid way to insure against extreme stuck pipe situations. Hydraulic darts are simple to use, completely safe and therefore provide for much faster program recovery.

      Find out more
    • DAV MX CircSub

      DAV MX CircSub

      The DAV MX™ is a multi-function, multi-cycling circulating sub which is activated with our patented MX™ Smart Dart technology. The system raises the bar on performance and reliability without adding complexity for the user. With several patented features, such as hold open and latch & seal, the tool is clearly the smart choice for CircSub users.

      Find out more
    • DURA Drill Float

      DURA Drill Float

      The Double Upper Reserve Activating (DURA™) Float gives operators superior well control on a number of contingency applications. The float provides a barrier against fluid ingress after stuck pipe severance with the HyPR HoleSaver™ or for providing a reserve float in case of primary failure or other drill string malfunction. The large 3.23" bore also allows most activators to travel through safely while in dormant mode. The DURA Drill Float™ is based on the tried and tested Self-Filling Float™ technology.

      Find out more
    • Self-Filling Float

      Self-Filling Float

      The Self-Filling Float™ is a range of premium floats that remain dormant until activated. They have a unique ability to remain dormant indefinitely whilst other operations are performed. Available in flapper or poppet format these high quality floats can be used as primary floats to be activated after running into hole or back-ups to primary systems. They deliver savings by accelerating trip speeds or even eliminating the need for some trips altogether. The systems are also useful for more complex sequential well control applications.

      Find out more